AS9100 vs AS9120 comes down to one question: does your shop change the part? AS9100 is for organizations that design and make product. AS9120 is for distributors that buy, store, split and ship parts, materials and assemblies without altering them. Both include all of ISO 9001:2015. If any revenue line machines or processes parts, AS9100 is the floor.
Clause-by-clause comparisons answer a different question. The decision a quality manager or owner has to make is which certificate each revenue line needs, and which contract and regulatory obligations come with it. The rest of this piece works through that, including the case most guides skip: the machine shop that also sells hardware off the shelf.
What the two standards share
Both are SAE documents, published six weeks apart in late 2016. AS9100D was published on 20 September 2016 and AS9120B on 1 November 2016. Both listings show the status as current. The abstracts use the same wording. Each standard "includes ISO 9001:2015 quality management system requirements" and "specifies additional aviation, space, and defense industry requirements, definitions, and notes." The full title of AS9120B names its audience as aviation, space and defense distributors.
The AS9120B scope says its requirements are "complementary (not alternative) to customer and applicable statutory and regulatory requirements." That wording matters for everything below. A certificate doesn't replace a purchase-order quality clause or a contract regulation. It sits underneath them, and a customer can ask for more.
Where AS9120 scope stops
The certification bodies are blunter than the abstracts. Intertek says AS9120 is "intended for use by organisations that procure parts, materials, and assemblies," including those "that procure products and split them into smaller quantities." It is "not intended for organisations that maintain or repair products" or that "perform work that affect or could affect product characteristics." Intertek adds that the standard "ensures that materials are handled properly through the chain of custody."

Kiwa puts the line in the same place. It describes AS9120's audience as organizations "responsible for procuring, storing, and supplying parts without changing their design or function," and lists "comprehensive traceability" and "prevention of counterfeit parts" among what the standard adds to ISO 9001.
So splitting a reel or a bulk lot into smaller quantities stays inside AS9120. Cutting a feature, applying a process or doing anything else that could change how the part performs does not.
The machine shop that also resells hardware
Plenty of mid-market aerospace suppliers have two businesses under one roof. A CNC shop makes brackets and fittings to print, and it also stocks fasteners, bearings or other catalog hardware that it sells to the same customers unchanged.
AS9120 can't cover the machining. Under Intertek's description, work that affects or could affect product characteristics is outside AS9120's scope, and machining a part to print is exactly that. Any shop that makes parts needs AS9100. An AS9120 certificate on its own would leave the main revenue line uncovered.
The real question is whether to add AS9120 on top. Three conditions make the case:
-
The resale of unchanged hardware, often split from larger lots, is a material share of revenue rather than an occasional convenience for a customer.
-
Customers buy that hardware from you as distributor product, and their purchase orders or supplier approvals treat you as a distributor for those lines.
-
Customer flowdowns on the resale business explicitly call for a distributor certificate.
If none of these apply, a second certificate is mostly cost. If they do apply, the AS9100 certificate won't tell a buyer what they want to know about how your stocking operation handles chain of custody and traceability. Before budgeting, ask your certification body how it would scope, schedule and price a second standard for your site.
DFARS 252.246-7008: the electronic-parts trace
For defense work, the regulation that hits a distributor hardest isn't in either standard. DFARS 252.246-7008, Sources of Electronic Parts (JAN 2023), separates suppliers by their relationship to the original manufacturer. The acquisition.gov page shows a DFARS change effective 7 May 2026.

An authorized supplier is a supplier, distributor or aftermarket manufacturer with a contractual arrangement with, or the express written authority of, the original manufacturer or current design activity to buy, stock, repackage, sell or distribute the part. A contractor-approved supplier has no contractual agreement with the original component manufacturer for a transaction "but has been identified as trustworthy by a contractor or subcontractor."
The status has a direct cost. Under paragraph (c), a contractor that is neither the original manufacturer nor an authorized supplier for an electronic part must have "risk-based processes … that enable tracking of electronic parts from the original manufacturer to product acceptance by the Government." If it can't establish that traceability, it is "responsible for inspection, testing, and authentication." The documentation has to be kept in accordance with FAR subpart 4.7 and made available to the Government on request.
For a stockist, the practical result is that franchise agreements and written manufacturer authorizations are worth as much as the certificate, because buyers' compliance burden depends on them. If you buy outside franchised channels, expect customers to ask how you trace parts back to the original manufacturer, and plan for the inspection and authentication cost if you can't. AS9120's emphasis on traceability and counterfeit prevention, as Kiwa describes it, is the management-system side of the same problem.
FAA AC 00-56 for civil aviation parts
Civil aviation adds a voluntary layer. The Aviation Suppliers Association says it "Manages the FAA AC 00-56 Database on behalf of the FAA," and that "Current acceptable quality system standards are ASA-100, ISO 9001, AS9100, AS9120, and AS9110." ASA describes ASA-100 as "a 36-month Audit Program which meets Advisory Circular FAA 00-56" and says "Only ASA can accredit a company to ASA-100."
For a parts distributor selling to civil operators, that means an AS9120 certificate can serve as the quality system basis for voluntary AC 00-56 accreditation, without running a separate system to a different standard. Whether the listing is worth having depends on whether your civil customers check the database when they approve sources.
OASIS makes the choice public
Whichever certificate you hold, buyers can see it. According to PRI, the Online Aerospace Supplier Information System "is a product of the International Aerospace Quality Group (IAQG)" and "houses supplier and audit assessment data for all companies who hold an accredited certification" to AS9100, AS9110 or AS9120. PRI says listing "is not optional."
This matters most for the hybrid shop. A supplier quality engineer looking you up will see an AS9100 certificate, an AS9120 certificate, or both. If your sales team presents you as a stocking distributor and OASIS shows only a manufacturing certificate, expect questions during supplier approval.
Revision status as of November 2026
The series is being renamed. AS9100 is moving to IA9100 and AS9120 to IA9120, but no new standard has been released. Glocal Insight wrote that "As of November 17, 2026, IAQG has not published the new standard, a release date or a transition deadline" for IA9100. It said AS9120 moves to IA9120 "on the same series schedule. No dates published," and that existing AS9100D certificates remain valid. The QMS Collective, writing on 16 October 2026, also said AS9100 Rev D is still the current revision and called circulating publication estimates unconfirmed.
Don't hold off on a certification decision while waiting for IA9120. With no published text, date or transition deadline, waiting means going without a certificate that customers can look up in OASIS today. You can plan for the transition once IAQG publishes it.
Decision table by business model
| Business model | Changes the part? | Certificate | Also consider |
|---|---|---|---|
| Pure stockist or broker, no processing | No | AS9120 | AC 00-56 listing for civil parts; authorized supplier status for defense electronic parts |
| Distributor that kits, cuts to quantity or splits lots without changing characteristics | No | AS9120 | Traceability records that hold up through splitting |
| Distributor whose value-add alters product characteristics (machining, processing) | Yes | AS9100 (outside AS9120 scope) | AS9120 for any remaining unchanged resale lines |
| Job shop or contract manufacturer, no resale | Yes | AS9100 | Customer purchase-order clauses |
| Manufacturer with a meaningful resale or stocking line sold as distributor product | Both | AS9100 plus AS9120 | Whether resale revenue and customer flowdowns justify the second certificate |
| Repair or overhaul | Yes (maintains or repairs) | Not AS9120 (excluded per Intertek) | The aerospace maintenance-organization standard in the same family; ask your registrar |
On cost, Amtivo, a certification body, publishes US pricing for small and medium enterprises starting at $6,000, depending on organization size, location and sector. That's one registrar's starting point, not a market rate. It's a useful anchor when you compare quotes, and for a hybrid shop deciding on a second certificate it's the minimum to set against the resale margin that certificate would protect.
A checklist for the floor
-
List every revenue line and mark it "changes the part" or "doesn't." Anything in the first column puts you in AS9100.
-
Pull the quality clauses from your top customers' purchase orders and supplier approvals. Check whether they call for a distributor certificate on the lines you resell.
-
For electronic parts going into defense work, establish whether you are an authorized supplier under the DFARS 252.246-7008 definition for each line you stock. Where you aren't, document how you trace parts to the original manufacturer or budget for inspection, testing and authentication.
-
If you sell to civil operators, decide whether AC 00-56 listing through ASA would help customers approve you.
-
Look up your own OASIS listing and confirm it matches how your sales team describes the business.
Related reading
-
How Defense Suppliers Should Answer the Pentagon's Additive Qualification Survey
-
What the China block on the ABB Robotics SoftBank deal means for robot buyers
